Bubble Washer Machine & Bag User Manual

This guide will walk you through the proper setup and operation of your bubble hash extraction system using a washing machine and filter bags. Following these steps will help you maximize yield and maintain extract quality.

---

📦 What You'll Need

• Ice water washing machine

• Set of bubble hash bags (micron filters)

• Wash bag for plant material

• 2 or 3 large buckets (5-gallon recommended)

• Clean, cold water

• Plenty of ice (preferably crushed)

• Spray bottle or water lance

• Metal spoon or collection tool

• Parchment paper and pressing screen

• Optional: more buckets, you cant have enough!
  

---

❄️ Preparation & Setup

1. Set up the Washer:

   • Place your washer on a raised surface (like a crate or bench) in a cold room or cool environment.

   • Ensure it's on a stable, waterproof surface with good drainage nearby.

2. Insert Bubble Bags into Collection Bucket:

   • Line your bucket with bubble bags starting from the smallest micron (25μ) at the bottom to the largest micron (e.g., 220μ) at the top.

   • Make sure each bag sits with a gap against the previous to avoid cross-contamination between layers.

---

🌿 Loading Plant Material

1. Prepare Your Plant Material:

   • Place your material (fresh frozen or dried) inside the wash bag.

   • TIP: Tie the drawstrings of the wash bag to the washer lid's zipper or hook to keep it in place during agitation.

2. Pre-Soak (Important for Dried Material):

   • If using dried plant material, pre-soak for at least 30 minutes in cold water before starting the cycle.

   • This prevents contamination and allows trichomes to separate cleanly.

---

🌀 First Wash Cycle

1. Load the Washer:

   • Place the tied wash bag into the washing machine.

   • Fill the washer about two-thirds full with cold water.

2. Add Ice:

   • Place a layer of ice on top of the wash bag to:

     • Keep the bag submerged.

     • Lower the water temperature.

   • Continue filling until you reach the washer’s fill line.

   TIP: Avoid using ice cubes during agitation. Instead, use crushed ice in small amounts throughout the cycle to maintain a low temperature and minimize plant matter contamination though the ice mashing up the material.

3. Start the Cycle:

   • Turn on the washer for the first wash. Cycle times vary by material type and quality.

   • Recommended starting cycle: 10 minutes.

   • Observe agitation. If needed, adjust time in future cycles.

---

⏳ Post-Wash & Settling

1. Let the Mixture Settle:

   • After the cycle completes, allow the mixture to settle for 20–30 minutes. This lets trichomes sink to the bottom, improving collection efficiency.

2. Drain into Filter Bags:

   • Position the washer’s drain hose above your bucket lined with bubble bags.

   • Let the water drain fully through the filter bags.

   • TIP: If your filter bucket is small, you may need a second bucket to catch overflow.

3. Re-clip the Drain Hose securely to the washer once drained.

---

🔁 Second & Subsequent Cycles

1. Prepare the Second Wash:

   • If you have a second bucket, pre-fill it with cold water and ice for rapid reuse.

   • Pour this cold water into the washer to begin the second cycle immediately.

   • If not, repeat the previous loading process, including pre-soaking and ice addition.

2. Start Second Wash Cycle:

   • Wait for ice to melt , then start another 10–15 minute wash cycle.

   • Continue repeating this process until no more trichomes appear in your filter bags.

---

💧 Washing & Collecting Hash

1. Process Each Micron Bag:

   • Once all wash water has drained, begin collecting your hash from each bubble bag, starting from the top bag (largest micron).

   • Use a spray bottle or water lance to gently rinse the contents of each bag. This helps:

     • Push trichomes through the screen.

     • Remove any remaining plant material.

     • Separate different micron layers cleanly.

2. Collect the Extract:

   • Use a metal spoon to carefully scoop the collected hash from each bag.

   • Place the extract on parchment paper or a pressing screen to dry.

   TIP: DO NOT RUSH THIS STEP Thorough rinsing is key to reducing contaminants and producing cleaner, higher-quality hash.

---

🔁 Repeat as Needed

• Continue running additional wash cycles as long as you're collecting trichomes.

• Most material yields well for 3–4 washes, depending on quality and freshness.

---

🧼 Cleaning & Storage

• Immediately rinse your wash bags and bubble bags with cold water after use.

• Do not use hot water or detergents.

• Hang bags to air dry thoroughly before storing.

• Store in a dry, cool location, away from sunlight.

---

✅ Tips for Best Results

• Keep it cold: Consistently low temperatures are crucial for preserving trichomes and avoiding contamination.

• Gentle agitation: Over-agitation can break down plant material and reduce quality.

• Organize by micron: Label collected hash by micron size to track potency and texture.

• Work in batches: Use multiple cycles for best yield.

• Cut out microns: You don't need to use every micron to get the best results. 25 is often missed out completely. Please take time to research different techniques online.